MAP Mock Exam 4 (Free)
Flagged
Submit Test
Question 1 of 50
When do accidents occur most frequently on construction sites for new workers or visitors?
Flagged for review — you can come back to this question later.
Just before lunchtime
At the beginning of their work on a new site
During extremely hot weather
Shortly after they start their workday
Question 2 of 50
Why is it important to record near accidents on a construction site?
Flagged for review — you can come back to this question later.
Because it is required by the Health and Safety at Work Act
Because there is a rule to document every near accident
To understand the situation and prevent similar accidents from happening in the future
To identify who is responsible for legal compensation processes
Question 3 of 50
How does tetanus, a disease often contracted from dirty environments, typically enter one's body?
Flagged for review — you can come back to this question later.
Through the pores of the skin
By breathing it in through the nose
Through a cut or wound on the skin
By swallowing it while eating or drinking
Question 4 of 50
What condition can construction workers prevent by wearing the right gloves when handling dangerous chemicals?
Flagged for review — you can come back to this question later.
Lower back pain
Carpal tunnel syndrome
Dermatitis
Muscle strains
Question 5 of 50
Under what circumstances can both men and women use the same toilet on a construction site?
Flagged for review — you can come back to this question later.
When the toilet is inside a private room that can be locked for individual use
When separate hand washing facilities are available
When the toilets are cleaned after each gender uses them
When there is a schedule stating specific times for each gender
Question 6 of 50
An employee is showing early signs of work-related stress. How should you help them?
Flagged for review — you can come back to this question later.
Advise them to take more frequent breaks and practice relaxation techniques
Suggest they use some of their vacation days to recover
Discuss their current responsibilities and direct them to a program that supports employees
Move them to a less demanding department without reducing their salary
Question 7 of 50
What should you do to ensure fairness in the workplace?
Flagged for review — you can come back to this question later.
Treat all staff and job candidates with respect and impartiality
Limit women's roles to office settings exclusively
Only hire native English-speaking males
Exclude candidates with disabilities from the interview process
Question 8 of 50
When should you use an automated external defibrillator (AED)?
Flagged for review — you can come back to this question later.
When a person is having difficulty breathing and holding their chest
When a person is breathing normally and has a steady heartbeat
When a person faints and is losing a lot of blood
When a person has stopped breathing and doesn't have a heartbeat
Question 9 of 50
What should you do if you cut your finger and it continues to bleed heavily?
Flagged for review — you can come back to this question later.
Cover it with a cloth and continue with your tasks
Tell your supervisor about the incident
Get help from a first aid professional or seek medical attention
Clean it well and then go back to your duties
Question 10 of 50
When can you skip wearing a helmet on a construction site?
Flagged for review — you can come back to this question later.
During extremely hot weather conditions
When the task doesn't involve overhead risks
If it's the final stage of the construction process
When you are in a safe area, like the construction site's office
Question 11 of 50
What precautions should be taken before starting a task that is expected to generate dust?
Flagged for review — you can come back to this question later.
Use machinery that reduces or eliminates dust production and wear appropriate safety gear for the task
Proceed with the task without any special precautions because dust is not a significant health threat
Cancel the task completely due to the high risks associated with dust exposure
Limit the duration of work, thinking that taking intermittent breaks will greatly reduce the inhalation risk of dust
Question 12 of 50
If employees are given a dust mask that cannot protect them from dangerous gases, what should they do?
Flagged for review — you can come back to this question later.
Wear another dust mask on top of the first one
Start the task immediately while using the given dust mask
Wait until they have been provided with the right protective gear before starting work
Continue with the job without a mask, but make sure to get fresh air regularly
Question 13 of 50
Is it possible to reverse the effects of long-term noise damage?
Flagged for review — you can come back to this question later.
No, it cannot be undone once it's done
Yes, through surgery
Yes, with long periods of silence
Yes, by working in a quieter environment
Question 14 of 50
What is vibration white finger?
Flagged for review — you can come back to this question later.
A temporary numb feeling after riding a bike
A permanent injury to the hands caused by using vibrating tools
A contagious infection affecting the hands
A reversible disorder caused by being outside in the cold
Question 15 of 50
What should a contractor do if they think there is asbestos on a construction site?
Flagged for review — you can come back to this question later.
Look for medical staff on site
Stop work and evacuate the area immediately
Give a sample to the project leader
Dispose of the material properly and continue working
Question 16 of 50
Which substance is the least likely to cause harm to the skin?
Flagged for review — you can come back to this question later.
Synthetic dyes
Degreasing agents
Asbestos
Adhesives
Question 17 of 50
What is the correct way to position the cylinders when setting up oxyacetylene-welding equipment?
Flagged for review — you can come back to this question later.
Positioned horizontally
Tilted at an angle
Prop up upside down
Placed vertically
Question 18 of 50
What does this sign mean?
Flagged for review — you can come back to this question later.
Be careful of objects that may hang low
You need to wear swimwear here
You must wear safety boots or shoes
Take off your shoes before entering
Question 19 of 50
What does this symbol mean?
Flagged for review — you can come back to this question later.
Protective gloves are not necessary in this area
You should have protective gloves with you
You must wear protective gloves
You can dispose of your protective gloves here
Question 20 of 50
What colours are used for signs indicating exits and safety locations, such as fire escapes and medical aid stations?
Flagged for review — you can come back to this question later.
Green and white
Orange and white
Black and yellow
Purple and silver
Question 21 of 50
What is the meaning of signs that are yellow and black?
Flagged for review — you can come back to this question later.
They indicate potential risks or dangers that require caution.
They provide general guidance or facts.
They signify areas where access is denied.
They indicate routes or paths to follow.
Question 22 of 50
What is the purpose of HSG168 in construction?
Flagged for review — you can come back to this question later.
Guidelines provided by the Health and Safety Executive (HSE) for managing construction projects safely
Rescue team instructions for responding to construction site emergencies
Documentation of fires at construction sites
Regulations for labelling fire suppression equipment by colour
Question 23 of 50
In an industrial setting, what color is the plug for a 400-volt electrical source?
Flagged for review — you can come back to this question later.
Green
Orange
Red
Purple
Question 24 of 50
What is the most common reason for accidents involving electricity?
Flagged for review — you can come back to this question later.
People who handle or are near electrical devices did not have enough training.
Protective clothing against electrical arcs was used.
The machines were turned off and labelled for safety.
Safety rules and procedures were followed.
Question 25 of 50
When instructing an employee who is about to use a rotating blade power tool, what should you tell them to do?
Flagged for review — you can come back to this question later.
Remove the protective shield for better visibility of the blade
Take off the protective shield but remember to wear protective gloves
Position the shield to expose as much of the blade as possible
Adjust the shield so only the necessary amount of blade is exposed
Question 26 of 50
What can happen if you operate an abrasive wheel at a speed higher than advised?
Flagged for review — you can come back to this question later.
The machine's engine could catch fire
The wheel might get stuck and stop working
The protective shield may not work
The wheel can break into pieces
Question 27 of 50
What hazards should the team be aware of while using a pickaxe to break a surface?
Flagged for review — you can come back to this question later.
Risking getting sunburned from UV rays reflecting off the pickaxe
Standing too close to the person using the pickaxe
Drinking soda because it might cause a chemical reaction
Keeping their hands in their pockets
Question 28 of 50
If someone is using a disc cutter to cut concrete blocks near you, what is the most likely immediate danger you may face?
Flagged for review — you can come back to this question later.
Pieces of concrete flying at high speed
Numbness in fingers from vibration
Skin problems
Too much oxygen in the air
Question 29 of 50
When is there the highest chance of pedestrians being injured by a construction site vehicle?
Flagged for review — you can come back to this question later.
When the vehicle is unloading into a dig site
When the vehicle is moving backward
While the vehicle is excavating for foundations
When the vehicle is loading materials on scaffolding
Question 30 of 50
What is the maximum allowable unprotected gap between any guardrail, toe board, barrier, or similar means of protection on a scaffold?
Flagged for review — you can come back to this question later.
200 mm
470 mm
600 mm
800 mm
Question 31 of 50
What is the final option to protect someone's occupational wellbeing during elevated work?
Flagged for review — you can come back to this question later.
Security mesh or inflatable air cushions
Transient work platform that can be lifted
Portable structure to reach high areas
Safety attachment gear and fall-preventing lanyard
Question 32 of 50
What is the recommended approach to using ladders for employee safety at elevated heights?
Flagged for review — you can come back to this question later.
Ladders can be used if they help speed up task completion
Ladders should only be used as a last resort when no other safer options are available
Ladders are always acceptable for tasks below 3 metres in height
Ladders are currently prohibited on all job sites
Question 33 of 50
What condition must be met for a mobile elevated work platform (MEWP) to be safely deployed on soft ground?
Flagged for review — you can come back to this question later.
When the MEWP has stabilising extensions
When the MEWP is placed on scaffold boards on the soft ground
When the ground is dry
When the ground's weight-bearing capability has been assessed and deemed sufficient
Question 34 of 50
What is the safest way to prevent someone from accidentally falling off a flat rooftop while inspecting it?
Flagged for review — you can come back to this question later.
Have someone nearby to shout a warning when someone gets too close to the edge
Put a warning sign next to the roof's edge
Use red and white barrier tape to mark the edge
Install guard-rails and toe-boards around the edge of the roof
Question 35 of 50
What should be done BEFORE using a scaffold with stone-based securing ties?
Flagged for review — you can come back to this question later.
Evaluate the securing ties for safety and stability
Look for an inspection indicator showing the current day
Count all the ties
Brief the person who set up the scaffold
Question 36 of 50
When performing tasks at height, what is necessary to ensure safety?
Flagged for review — you can come back to this question later.
Exclusive work of scaffold contractors
Work can continue in low wind speeds
Maximum speed is crucial
Thorough risk assessment and meticulous planning
Question 37 of 50
When conducting a viability analysis, you want to check the roof supports of a manufacturing unit. What is the highest point that a tower, which can move and support itself, can reach inside the building?
Flagged for review — you can come back to this question later.
The tower can reach a height four times the length of its base.
The tower can reach four stages of elevation.
There are no restrictions on the height.
The manufacturing company determines the maximum height.
Question 38 of 50
What is the main thing a contractor's responsible person should think about before arranging for someone to go into a small space?
Flagged for review — you can come back to this question later.
Has everyone who is going inside been trained properly
Can the task be done in a different way
Is there a safe way to enter and exit
Has the environment inside the space been checked
Question 39 of 50
When should you bevel or layer a dig area?
Flagged for review — you can come back to this question later.
If there are any underground utilities in the dig area
If there's a risk of the sides collapsing, no matter how deep it is
If it's deeper than 5 meters
If there's any liquid at the bottom of the dig
Question 40 of 50
If you notice a shift in an excavation's lateral supports, what should you do?
Flagged for review — you can come back to this question later.
Move the workers to a different section of the excavation
Ignore it, as minor displacements in supports are normal
Continue to monitor the situation for further movement
Immediately evacuate all workers from the excavation area
Question 41 of 50
You're in charge of waste management and the driver of a waste transportation vehicle gives you a hazardous waste consignment note with the carrier's information filled in. What should you do first with this document?
Flagged for review — you can come back to this question later.
Keep the document for future use without verifying the details
Refuse to accept the document as it is not necessary
Ignore it since the driver carrying the waste has already signed it
Check that the details in Sections A, B, and C are correct before signing off the producer's information in Section D
Question 42 of 50
What method is recommended for transferring fuel at a plant refuelling point?
Flagged for review — you can come back to this question later.
Drawing fuel into the mouth and transferring it
System with a pump and an automatic shut-off nozzle
Using the force of gravity for fuel flow from a large-scale storage tank
Pouring fuel from a portable container through a plastic cone
Question 43 of 50
According to the Construction (Design and Management) Regulations 2015, who is responsible for ensuring proper project management, including enough time and resources?
Flagged for review — you can come back to this question later.
The main architect
The construction team
The customer
The designers
Question 44 of 50
According to the Construction (Design and Management) Regulations of 2015, who should the principal designer give the health and safety file to at the end of the construction project?
Flagged for review — you can come back to this question later.
The client
The Occupational Safety and Health Administration (OSHA)
The main building contractor
The draftsperson
Question 45 of 50
According to the Construction (Design and Management) Regulations 2015, which of the following is NOT a responsibility of the main contractor in terms of worker consultation and engagement?
Flagged for review — you can come back to this question later.
Providing access and permission to duplicate any information affecting an employee's health, welfare, and safety at work
Taking into account employee feedback on health and safety at work
Sharing information about an individual's health and safety record
Engaging in conversations and involving employees in developing procedures for their health and safety
Question 46 of 50
If a contractor finds unidentified barrels or vessels at the site, what should they do?
Flagged for review — you can come back to this question later.
Open the containers to check if they have flammable material.
Stop work until the items are safely dealt with.
Ignore the objects because they will be destroyed later.
Dispose of the items in the nearest rubbish bin.
Question 47 of 50
What should a contractor do if they find a faulty wire rope sling?
Flagged for review — you can come back to this question later.
Only use it for lifting weights under one tonne
Stop using it and make sure others don't use it
Report the fault at the end of the day
Continue using it for loads up to half of its safe working capacity
Question 48 of 50
What do you need to get before you can safely cut open fuel tanks?
Flagged for review — you can come back to this question later.
A risk assessment according to the Control of Substances Hazardous to Health Regulations
A certificate to dispose of rubbish
A certificate to show there's no gas
An assessment of the environmental impact
Question 49 of 50
What does the Health and Safety at Work etc. Act require from employers?
Flagged for review — you can come back to this question later.
Prescribing methods for executing tasks at work
Instructing the creation of hazard analysis documents
Detailing on-site health and safety oversight procedures
Making sure the workplace is secure
Question 50 of 50
What is the first thing you should do after identifying a risk that could harm your team?
Flagged for review — you can come back to this question later.
Eliminate the risk completely if possible
Change the tasks to match each worker's abilities
Give safety training to all employees as a group
Make sure first aid kits are easy to access